Request a "Flush-Kleen System" Quote
The Bass Flush-Kleen system design is the result of years of hands on research and development in our own facility. Originally designed for the commercial breeder in mind, this system has found widespread acceptance for numerous applications from fanciers to research facilities. It is a totally integrated cage and cleanout system that will minimize labor and maximize the efficiency of your operation. The free standing , modular design allows for installation in a variety housing situations. The one piece sectional ABS plastic trays contain waste to allow use in garages, frame structures with wood or concrete floors, even second floor areas where the use of conventional trays is not practical. Eliminate shoveling manure or the endless task of dumping trays forever! The Flush-Kleen system allows the waste to be washed down to a single drain and out to sanitary sewer or other means of separation and disposal. The benefits of a truly clean enviroment for your animals and the time and labor saved over conventional cleaning methods are immeasurable!
Our one piece molded ABS plastic trays are formed to but end-to-end and bolt together with stainless bolts in pre-drilled holes. Silicone sealer should be used between sections before bolting together. All trays are shipped with sections pre-drilled and marked for easy assembly. The end drain attaches to the end of each row in the same fashion and allows for attachment of a 3 inch thin wall PVC drain pipe. Final attachment to sewer or other drainage is the responsibility of the end user.
The system is designed utilizing our standard cage legs, connected by special spacers. The trays outer edge sets in the standard tray slide tabe in each leg with the upper deck tray resting on the lower cage and the lower tray resting on a special cross brace that is connected between the legs. All legs are assembled to the same length and should be installed on a floor with a slight fall to the drain end of the unit to facilitate proper drainage. If you have a level floor, we do have an optional leg extension kit that will give the proper fall for drainage. While this option is usaully not necessary, our sales personnel can advise you on the proper installation for your particular facility.
Cages for all Flush-Kleen systems are constructed using standard galvanized-before-weld babysaver wire with heavy duty 14 gauge GalFan floor material. C-rings are provided for assembly instead of J-clips for improved corrosion resistance. Doors are mounted to swing outward and downward with our SPL-3 spring lock proved to secure the door. The cages are constructed to utilize a common back wall divider and are assembled as a back-to-back unit rather than two individual cages backed together. This allows the completed width to be close to the actual 48" needed to ease the final assembly process. When complete, the entire cage battery is assembled together as one unit.
All cages are 24" deep (front to back) and 16" high. Widths may vary from 12" up to 36" but upper and lower level ones must be the same width or equal divisions of each other to allow proper leg placement(30" top,15" lower, etc.).
Due to the complexity of the systems and the need to work one on one with the customer when ordering, we ask that you call our sales department or submit a request a quote form below for a quote on your Flush-Kleen system. We can help you design a system that will fit your needs exactly.
Request a "Flush-Kleen System" Quote
The Bass Flush-Kleen cage system for kennels is an efficient, labor saving design that will make sanitation and waste removal the easiest part of your daily chores. Our pre-formed ABS plastic flush trays have the gutters molded in as part of the tray, not a seperate trough as is seen in most systems. The integrated rack and cage design is available in either a free standing double deck system with a center drain or a double deck configuration that can be installed against the wall.
The free standing system features back to back cage configuration with each five foot section containing eight compartments 30x24x24 high (four on top level, four on lower level). The wall mount system features four compartments 30x30x24 high per five foot section. Maximum length of rows should be kept to 30 feet on either system for best drainage.
Cages are built standard with 12 gauge fronts and 14 gauge sides and tops. Your choice of either 12 gauge 1x1, 14 gauge 3/4x3/4, or 16 gauge 1/2x1 floor. All wire is our premium PVC coated material. Cages are sold unassembled. Front panels are complete with doors installed. All other components are pre-cut to size ready for assembly with stainless steel c-rings, which are included. Final assembly is available for an extra charge, but assembled units must be picked up at our Monett, MO location and can not be shipped.
The leg system for the double deck design utilizes our powder coated cage legs with special connectors that attach to the cage with tabs, making the cage the superstructure of the rack. This design minimizes the possibility of corrosion and makes assembly simple. All legs are assembled to the same length and should be installed on a floor with a slight fall to the drain end of the unit to facilitate proper drainage. If you have a level floor, we do have an optional leg extension kit that will give the proper fall for drainage. While this option is usually not necessary, our sales personnel can advise you on the proper installation for your particular facility.
The wall mounted design, because it attaches to the wall, uses a different support system. Pre-cut pieces of 1 5/8" perforated steel angle make up the framework for this style unit. The heavy duty frame material is plated with Galv-Krom, a special two part plating process that is very rust resistant. All bolts are included for final assembly. Some trimming of the trays may be necessary to make the final fit when assembling. Flush trays should be mounted to the wall with a slight fall to the desired drain end of the unit. Final connection to sewer or other waste outlet is the responsibility of the customer. We also offer polyethylene plastic sheets for use as back splash protection, if needed. Overlap these sheets into the trays where they attach to the wall for maximum leak protection when washing down.
Due to the complexity of this system and the need to work one-on-one with the customer when ordering, we ask that you call our sales department or submit a request a quote form below for a quote on your Flush-Kleen system.
FLUSH KLEEN COMPONENTS
1/16" 4' x 10' polymax polyethylene sheet.
No. PMX - $39.95
32" x 61" single wide Flush-Kleen tray only.
No. - FK-32TS - $89.95
48" X 61" Double/Center drain Flush-Kleen tray only.
No. - FK-48TS - $104.95
End Drain Section for FK-48TS Tray.
No. - FKD-48 - $52.95
End Drain Section for FK-32TS Tray
No. - FKD-32 - $31.75
Perforated Angle Frame Material
No. - FK-ANGL - $3.95/ft.
ABOVE ITEMS MUST SHIP MOTOR FRIEGHT
New shipping rates -- Click Here -- for details!