|
Request a "Flush-Kleen System" Quote
The Bass Flush-Kleen system design is the result of years of hands on research and development in our own facility. Originally designed for the commercial breeder in mind, this system has found widespread acceptance for numerous applications from fanciers to research facilities. It is a totally integrated cage and cleanout system that will minimize labor and maximize the efficiency of your operation. The free standing , modular design allows for installation in a variety housing situations. The one piece sectional ABS plastic trays contain waste to allow use in garages, frame structures with wood or concrete floors, even second floor areas where the use of conventional trays is not practical. Eliminate shoveling manure or the endless task of dumping trays forever! The Flush-Kleen system allows the waste to be washed down to a single drain and out to sanitary sewer or other means of spreration and disposal. The benefits of a truly clean enviroment for your animals and the time and labor saved over conventional cleaning methods are immeasurable!
 Our one piece molded ABS plastic trays are formed to but end-to-end and bolt together with stainless bolts in pre-drilled holes. Silicone sealer should be used between sections before bolting together. All trays are shipped with sections pre-drilled and marked for easy assembly. The end drain attaches to the end of each row in the same fashion and allows for attachment of a 3 inch thin wall PVC drain pipe. Final attachment to sewer or other drainage is the responsibility of the end user.
The system is designed utilizing our standard cage legs, connected by special spacers. The trays outer edge sets in the standard tray slide tabe in each leg with the upper deck tray resting on the lower cage and the lower tray resting on a special cross brace that is connected between the legs. All legs are assembled to the same length and should be installed on a floor with a slight fall to the drain end of the unit to facilitate proper drainage. If you have a level floor, we do have an optional leg extension kit that will give the proper fall for drainage. While this option is usaully not necessary, our sales personnel can advise you on the proper installation for your particular facility.
 Cages for all Flush-Kleen systems are constructed using standard galvanized-before-weld babysaver wire with heavy duty 14 gauge GalFan floor material. C-rings are provided for assembly instead of J-clips for improved corrosion resistance. Doors are mounted to swing outward and downward with our SPL-3 spring lock proved to secure the door. The cages are constructed to utilize a common back wall divider and are assembled as a back-to-back unit rather than two individual cages backed together. This allows the completed width to be close to the actual 48" needed to ease the final assembly process. When complete, the entire cage battery is assembled together as one unit.
All cages are 24" deep (front to back) and 16" high. Widths may vary from 12" up to 36" but upper and lower level ones must be the same width or equal divisions of each other to allow proper leg placement(30" top,15" lower, etc.).
Due to the complexity of the systems and the need to work one on one with the customer when ordering, we ask that you call our sales departmentfor a quote on your Flush-Kleen system. We can help you design a system that will fit your needs exactly.
Request a "Flush-Kleen System" Quote
What is the cost of the system? Cost will vary, depending on the size of the compartments, type of wire used, etc. An estimate of a ten foot long section of the double deck system would be about $1,500.00. However, with the infinite combinations of cage sizes, wire types, etc., Please call for an exact quote on your system.
|