|
Orders will ship out in 5 days |
|
|
FlushKleen Cat Kennel System
|
|
|
|
|
The Bass Flush-Kleen cage system for kennels is an efficient, labor saving design that will make sanitation and waste removal the easiest part of your daily chores. Our pre-formed ABS plastic flush trays have the gutters molded in as part of the tray, not a seperate trough as is seen in most systems. The integrated rack and cage design is available in either a free standing double deck system with a center drain or a double deck configuration that can be installed against the wall.
The free standing system features back to back cage configuration with each five foot section containing eight compartments 30x24x24 high (four on top level, four on lower level). The wall mount system features four compartments 30x30x24 high per five foot section. Maximum length of rows should be kept to 30 feet on either system for best drainage.
Cages are built standard with 12 gauge fronts and 14 gauge sides and tops. Your choice of either 12 gauge 1x1, 14 gauge 3/4x3/4, or 16 gauge 1/2x1 floor. All wire is our premium PVC coated material. Cages are sold unassembled. Front panels are complete with doors installed. All other components are pre-cut to size ready for assembly with stainless steel c-rings, which are included. Final assembly is available for an extra charge, but assembled units must be picked up at our Monett, MO location and can not be shipped.
The leg system for the double deck design utilizes our powder coated cage legs with special connectors that attach to the cage with tabs, making the cage the superstructure of the rack. This design minimizes the possibility of corrosion and makes assembly simple. All legs are assembled to the same length and should be installed on a floor with a slight fall to the drain end of the unit to facilitate proper drainage. If you have a level floor, we do have an optional leg extension kit that will give the proper fall for drainage. While this option is usually not necessary, our sales personnel can advise you on the proper installation for your particular facility.
The wall mounted design, because it attaches to the wall, uses a different support system. Pre-cut pieces of 1 5/8" perforated steel angle make up the framework for this style unit. The heavy duty frame material is plated with Galv-Krom, a special two part plating process that is very rust resistant. All bolts are included for final assembly. Some trimming of the trays may be necessary to make the final fit when assembling. Flush trays should be mounted to the wall with a slight fall to the desired drain end of the unit. Final connection to sewer or other waste outlet is the responsibility of the customer. We also offer polyethylene plastic sheets for use as back splash protection, if needed. Overlap these sheets into the trays where they attach to the wall for maximum leak protection when washing down.
Complete ten foot double deck Flush-Kleen kennel system with 16 - 30x30x24 high compartments. $1995.00
Complete ten foot single deck wall mount system with angle support frame, trays, and end drains. 4 - 30x30x24 high compartments. (Does not include plastic back splash panel. order no. PMX below) $595.00
Double deck five foot section. $650.00
1/16" 4' x 8' polymax polyethylene sheet.
No. PMX - $39.95
32" x 61" single wide Flush-Kleen tray only.
No. - FK-32TS - $84.95
48" X 61" Double/Center drain Flush-Kleen tray only.
No. - FK-48TS - $99.95
End Drain Section for FK-48TS Tray.
No. - FKD-48 - $49.95
End Drain Section for FK-32TS Tray
No. - FKD-32 - $29.95
Perforated Angle Frame Material
No. - FK-ANGL - $2.95/ft.
ABOVE ITEMS MUST SHIP MOTOR FRIEGHT
New shipping rates -- Click Here -- for details!
 * 
|
|