The free standing, modular design allows for installation in a variety housing situations. The one piece sectional ABS plastic trays contain waste to allow use in garages, frame structures with wood or concrete floors, even second floor areas where the use of conventional trays is not practical. Eliminate shoveling manure or the endless task of dumping trays forever!. The Flush- Kleen system allows the waste to be washed down to a single drain and out to sanitary sewer or other means of separation and disposal. The benefits of a truly clean environment for your animals and the time and labor saved over conventional cleaning methods are immeasurable!
ORDERING YOUR FLUSH-KLEEN CAGING SYSTEM
Due to the complexity of this system and the need to work one on one with the customer when ordering, we ask that you call our sales department for a quote on your Flush-Kleen system. We can help you design a system that will fit your needs exactly. Quote requests can also be submitted through our website.
Our one piece molded ABS plastic trays are formed to butt end-to-end and bolt together in pre-drilled holes. Silicone sealer should be used between sections when bolting them together. All trays are shipped with sections pre-drilled and marked for easy assembly. The end drain attaches to the end of each row in the same fashion and allows for the attachment of a 3 inch thin wall PVC drain pipe. Final attachment to sewer or other drainage is the responsibility of the end user.
The system is designed utilizing our standard cage legs, connected by special spacers. The tray outer edge sets in the standard tray slide tab in each leg with the upper deck tray resting on the lower cage and the lower tray resting on a special cross brace that is connected between the legs.
All legs are assembled to the same length and should be installed on a floor with a slight fall to the drain end of the unit to facilitate proper drainage. If you have a level floor, we do have an optional leg extension kit that will give the proper fall for drainage. While this option is usually not necessary, our sales personnel can advise you on the proper installation for your particular facility.
Cages for all Flush-Kleen systems are constructed using standard galvanized before weld babysaver wire with heavy duty 14 gauge GAW floor material.
C-rings are provided for assembly instead of j-clips for improved corrosion resistance. Doors are mounted to swing out and to the side with our SPL-3 spring lock provided to secure the door.
All cages are 30“ deep (front to back) and 16” high. Widths may vary from 12” up to 36” but upper and lower level cages must be the same width or equal divisions of each other to allow proper leg placement (30” top, 15” lower, etc).
Contact our sales department to discuss available configurations.
HOW TO ORDER
Due to the complexity of these systems and the need to work one on one with the customer when ordering, we ask that you call our sales department for a quote on your Flush-Kleen system. We can help you design a sytem that will fit need excatly. Call us at 800-798-0150 or email: email@example.com