Feeders

Bass Equipment has improved the classic rabbit feeder! The spot welded rabbit feeders offered by most companies had the disadvantage of being weak at the welded points which resulted in many of the feeders "coming apart at the seams" during shipping or normal cleaning and moving operations in use. Also, each spot weld destroys the galvanize due to the extreme heat and this leaves the metal open to rust and corrosion. The only solution to these problems is the Bass riveted rabbit feeder. Since the introduction of this fine feeder it has been widely acclaimed and accepted by the rabbit industry. There is no comparable rabbit feeder on the market. Order some today and compare...you'll agree!
Bass Equipment Company manufacturers exceptional quality rabbit feeders, bird feeders, poultry feeders and other small animal feeders.
   
ATTACHABLE FEEDER COVERS AFC-00

AFC-00 : ATTACHABLE FEEDER COVERS

Another Bass innovation! All our feeders are now pre-punched to accept our new attachable feeder cover. This unique cover attaches to allow access to the feed hopper without removal, but isn&#039;t permanent so it may be removed for cleaning or repair.<BR><div><BR></br><BR>Feeder covers measure 3.5" x 3.5", 5.5", 7.5", 9.5" or 11.5".

CAST ALUMINUM WATER/FEED DISHES AFP-00

AFP-00 : CAST ALUMINUM WATER/FEED DISHES

A breakthrough in feed and water crock design! Heavy duty cast aluminum construction. Aluminum won&#039;t rust like steel, and it won&#039;t break if dropped or when water freezes!

HARD BACK HAYFEEDER COMBO BFHFC-00

BFHFC-00 : HARD BACK HAYFEEDER COMBO

With the Combo Feeder you now you can feed hay, along with your regular pellet feed in the same feeder! Bass Standard Combo Feeders offer the same durability with the solid riveted back as their Standard Bass Feeder. Available in all five popular sizes. Pellets capacity is approximately 25% less than standard feeders of the same width.

HARD BACK WIDE MOUTH FEEDERS BFWM-00

BFWM-00 : HARD BACK WIDE MOUTH FEEDERS

Now, the Standard Riveted Solid Back feeder with a wide mouth trough! The wide mouth allows easy access to feed for the Lop and other large breeds as well as kennel and other small animal owners. Available in all 5 sizes.

CREEP FEEDERS CREEP-00

CREEP-00 : CREEP FEEDERS

The creep feeder can be placed at either end of the cage, the trough pulls out to be filled from outside the cage. No doors to open, no lost floor space. When not in use, trough is inserted upside down where it stays clean and ready for the next litter.

HAYRACKS EC-00

EC-00 : HAYRACKS

Hayracks are used by many who use hay in their feeding program. The Econo hayracks answers the need for a portable hayrack because it attaches securely in place to any cage front. It allows easy access for the animal while helping to prevent waste accumulation on the floor in front of the cage.

EZ CROCKS EZ-00

EZ-00 : EZ CROCKS

New design feed crocks and water crock that makes old crocks obsolete. Special wedge lock keeps crock secure yet easy and quick to remove from cage. These crocks are made of tough and durable ABS plastic. Ideal for carriers.

E-Z FEEDERS EZFDR-00

EZFDR-00 : E-Z FEEDERS

This durable plastic feeder has a perforated bottom to sift fines. The unique wedge lock holds unit to any standard wire cage. Ideal for carriers and small pet cages.

LAY ON FEEDER COVERS FC-00

FC-00 : LAY ON FEEDER COVERS

For the thousands of satisfied customers who still use our previous version of Fine-X and Standard feeders! We still offer our standard metal feeder cover.<BR><div><BR></br><BR>Feeder covers measure 3.5" x 3.5", 5.5", 7.5", 9.5" or 11.5".

FINE-X SCREEN FEEDERS FX-00

FX-00 : FINE-X SCREEN FEEDERS

The best self cleaning feeder in the industry, the Fine X Screen Feeder. Fine X feeder uses hardware cloth that is attached to the feeder frame with rivets and flanges,forming the trough and even part of the back. This way the pellets have to roll down over the hardware cloth, sifting out most of the fines and dust before collecting in the trough.<BR><div><BR></br><BR>Feeder mouth opening measures approximately 1.75" wide.

FINE-X 2 SCREEN FEEDERS FX2-00

FX2-00 : FINE-X 2 SCREEN FEEDERS

The FINE-X® II is very efficient in the self cleaning department, but also keeps the dust and fines in the tray under the cage, not on the floor! The same sturdy, riveted construction and quality screen bottom offers you the best possible compromise between standard and screen-bottomed feeders. FINE-X® II...another Bass innovation!

FINE-X HAY FEEDER COMBO FXHFC-00

FXHFC-00 : FINE-X HAY FEEDER COMBO

With the Hay/Pellet Combo Feeder you can feed hay, along with your regular pelleted feed, in the same feeder! Available in all five popular sizes. The Fine-X Combo Feeder pellets capacity is approximately 25% less than standard feeders of the same width.

FINE-X WIDE MOUTH SCREEN FEEDERS FXWM-00

FXWM-00 : FINE-X WIDE MOUTH SCREEN FEEDERS

Fine X Style has a wider trough feeder which permits easy access to feed for the Lop and other large breeds as well as kennel and other small animal owners. The Fine X style available in 5 sizes and styles listed below.

BASS DOG FEEDERS GBDF-00

GBDF-00 : BASS DOG FEEDERS

We also make high quality Bass dog feeders! A practically indestructible feeder that comes in either stainless steel or galvanized. Easy to use, this dog feeder features a wider mouth for easier access and sloped trough for smoother food flow. Attaches firmly to outside of cage with two wires on the galvanized option or stainless springs on the stainless option.

PARAKEET FEEDERS PK-00

PK-00 : PARAKEET FEEDERS

The J style bird feeders are made to be attached to the outside of the cage. This style of bird feeder allows you to fill the hopper from the outside of the cage. You no longer need to open the cage every time to feed. The bass bird feeder is constructed of 26ga. galvanized metal and is available in two popular sizes. This feeder is a great option for smaller birds, such as parakeets and finches.

PRO-B SCREEN FEEDERS PROB-00

PROB-00 : PRO-B SCREEN FEEDERS

The FEEDSAVER was designed and marketed for many years by Borak Manufacturing of Canada. Borak&#039;s closing made the feeder unavailable for the last several years. Bass was able to purchase the tooling and manufacturing rights to this popular feeder and is now proud to make it available once again.

PRO-B FEEDER COVERS PROBCOVER-00

PROBCOVER-00 : PRO-B FEEDER COVERS

PRO-B FEEDER COVERS

PRO-B HARD BACK FEEDERS PROBHB-00

PROBHB-00 : PRO-B HARD BACK FEEDERS

The FEEDSAVER was designed and marketed for many years by Borak Manufacturing of Canada. Borak&#039;s closing made the feeder unavailable for the last several years. Bass was able to purchase the tooling and manufacturing rights to this popular feeder and is now proud to make it available once again.

SLOTTED WIDE MOUTH FEEDERS SFWM-00

SFWM-00 : SLOTTED WIDE MOUTH FEEDERS

The Bass Slotted feeder is an all steel alternative to our screen feeders. The staggered slots offer great sifting ability, while the riveted steel construction creates an incredibly durable feeder. Great for those rabbits that insist on scratching and digging in the feeder. With the wide mouth design it is a great option for larger breads!

HARD BACK FEEDERS BF-00

BF-00 : HARD BACK FEEDERS

Improved feeders for the rabbit industry, solved by the Bass Hard Back Riveted Feeder. One of the first problems recognized by Bass Equipment Company was the need for an improved feeder in the rabbit industry. The spot welded feeders offered by most companies had the disadvantage of being weak at the welded points which resulted in many of the feeders "coming apart at the seams" during shipping or normal cleaning and moving operations in use. Also, each spot weld destroys the galvanize due to the extreme heat and this leaves the metal open to rust and corrosion. The only solution to these problems is the Bass Riveted Feeder. Since the introduction of this fine feeder it has been widely acclaimed and accepted by the rabbit industry. There is no comparable feeder on the market. Order some today and compare...you&#039;ll agree!